ULTRIX-MODX-IO User Guide (v1.0) Introduction • 9
Introduction
This guide is for system administrators and installers of the Ross Video ULTRIX-MODX-IO and its
modules. This guide contains the following chapters that cover the installation and configuration of
your blade and its modules:
• “Introduction” summarizes the guide and provides important terms, and conventions.
• “Getting Started” provides an overview for
• “Hardware Overview” provides an introduction to the ULTRIX-MODX-IO hardware features.
• “Installing the ULTRIX-MODX-IO” provides instructions for the basic physical installation of the
ULTRIX-MODX-IO into an Ultrix router.
• “Power Connection” outlines how to connect an external power supply to the ULTRIX-MODX-IO
blade. Note that this is an optional step and only required if advised by Ross Technical Support.
• “Installing a Module” provides a general summary of how to install a module into an
ULTRIX-MODX-IO blade.
• “Populating an SFP Port” outlines how to install an SFP module into a port on the
ULTRIX-MODX-IO blade and its modules.
• “ULTRIX-MOD-SFP” provides an overview of the hardware features, installation, and cabling of
the ULTRIX-MOD-SFP module.
• “Configuration” outlines how to configure the ports using the DashBoard interface.
• “Technical Specifications” provides the specifications, such as pinouts and power consumption,
for the ULTRIX-MODX-IO.
If you have questions pertaining to installation of this Ross Video product, contact us at the
numbers listed in “Contacting Technical Support”. Our technical staff is always available for
consultation, training, or service.
Related Publications
It is recommended to consult the following Ross documentation before installing and operating
your ULTRIX-MODX-IO:
• DashBoard User Manual, Ross Part Number: 8351DR-004
• ULTRIX-MODX-IO Quick Start Guide, Ross Part Number: 2101DR-002
• ULTRIX SFP Modules Guide, Ross Part Number: 2101DR-008
• ULTRIX-FR12 User Guide, Ross Part Number: 2101DR-604
• ULTRIX-FR1, ULTRIX-FR2, and ULTRIX-FR5 User Guide, Ross Part Number: 2101DR-004
The user documentation is available for download from our website.
Documentation Conventions
Special text formats are used in this guide to identify parts of the user interface, text that a user
must enter, or a sequence of menus and sub-menus that must be followed to reach a particular
command.
Interface Elements
Bold text is used to identify a user interface element such as a dialog box, menu item, or button. For
example:
In the Save Layout dialog, click OK.
To Next Page
Loading...
Need help?
General
