Ross ULTRIX-MODX-IO User Manual

14 • Hardware Overview ULTRIX-MODX-IO User Guide (v1.0)
The AUX ports can be populated with Small Form-factor Pluggable (SFP) modules from the factory
or by installing modules in the field. When an AUX port is populated on the ULTRIX-MODX-IO, its
status is reported in DashBoard and options are provided for mapping and configuring the I/O as
required. For a list of SFP modules available from Ross Video, refer to the ULTRIX SFP Modules
Guide.
4. Retaining Bolt
The retaining bolt is used to secure the blade to the router chassis.
5. Module Slots
Each ULTRIX-MODX-IO accepts up to four modules (e.g. ULTRIX-MOD-SFP) enabling you to
customize the I/O of the blade as required. Each slot is numbered (1-4) with Group 1 as the first
slot on the left. This information is also reported in the Group column of the Port Configuration
interface in DashBoard.
6. Blade Retaining Screws
There is a retaining screw on each end of the blade. These screws help to affix the blade to the
router chassis.

Ross ULTRIX-MODX-IO Specifications

General

Brand	Ross
Model	ULTRIX-MODX-IO
Category	Network Router
Language	English