ULTRIX-MODX-IO User Guide (v1.0) Installing the ULTRIX-MODX-IO • 23
To upgrade the router software
1. Contact Ross Technical Support for the appropriate software version (which includes the blade
firmware) for your setup. Refer to “Contacting Technical Support” for contact details.
2. Repeat steps 1 to 8 in the procedure “To verify the software version currently installed on
your router” of this document to display the System Status tab for your router.
3. Click Upload, located near the bottom of the tab.
The Select File to Upload dialog opens.
4. Navigate to the *.bin file you want to upload. This is the file that Ross Technical Support
provided you.
5. Click Open.
6. Click Finish to start the upgrade.
7. Monitor the upgrade.
An Upload Status dialog enables you to monitor the upgrade process.
Avoid clicking Reboot until the router has successfully completed the file upload process and the
OK button is enabled.
8. Click OK to reboot the router.
The Reboot Confirm dialog opens, indicating the router will reboot.
9. Click Yes to continue the upgrade process.
The router is temporarily taken off-line during the reboot process. The process is complete once
the status indicators for the router return to their previous status.
10. Verify that the Alarms and Frame Information tables in the Hardware Configuration
interface are updated:
• Repeat steps 1 to 7 in the procedure “To verify the software version currently installed on
your router” of this document.
• Expand the Devices node and double-click the Ultrix sub-node to display the Hardware
Configuration interface in DashBoard.
• Click Alarms (located in the left toolbar of the interface) to verify that the “
System Error” is
not displayed.
• Click Frame Information (located in the left toolbar of the interface) to verify the Firmware
versions.
To Next Page
Loading...
Need help?
General
