AC-015 Page 18 March 2008
• If the Lock Strike is defined as Normally Closed it
will always be active. If the Lock Strike is defined
as Normally Open it can be activated in the
following ways:
• Pressing the REX button
• Valid Code (from an outside reader only using
Prox. Code or Pin. Code)
3) Secure Mode
• The MODE LED is red
Mode Door
RED
• In this mode the Controller is in the highest level
of security.
• The Controller’s keypad is used for changing
modes of operation and activating the Lock
Strike by the employee codes.
• The Lock Strike will remain active according to
the programmed Release Time.
• In addition, it is possible to activate the Lock
Strike in the following ways:
a. Pressing the REX button
b. Master Codes (from an outside reader only
using Prox. Code or Pin. Code)
To Next Page
Loading...
