Rosslare AC-015 User Manual

AC-015 Page 6 March 2008
Introduction
The AC-015 Programmer is a controller that allows you
to add or delete employees from the system, change
system mode status and change system authorization
codes.
The AC-015 provides a higher level of security as the
programmer is normally placed in a secure location
while the reader sensor is remotely located outside
the premises to be controlled. Should the remote
sensor be attacked, entry cannot be gained as the
remote sensor only provides data to the programmer,
not authorization to release the controlled door.
The System may be connected with the optional PC
monitor program for easier management of
employees database or for online monitoring of door
access. The system is linked to a PC via RS-232 serial
link. The PC receives information from the AC-015,
which is displayed and saved to a database.
Codes entries and their consequences are visible in
Online Mode of the SW. Employees’ menu is used to
describe, enter and associate employee code
numbers with employee name and details.
Programming menu is used to define door details,
working days and holiday definitions. Reports menu
specifies which kind of report to build. Options menu is
used for communication setup, language setup,
operator’s password and database status. For more
details refer to the AC-015 Monitor Program Manual.
The AC-015 accepts up to 500 employees via the use
of proximity cards (provided separately) or PIN codes
into the system. Each employee is issued a unique
proximity card or PIN code.
Employees designated 01 to 10 are Master Users and
can operate the system in both the Normal and

Rosslare AC-015 Specifications

General

Brand	Rosslare
Model	AC-015
Category	IP Access Controllers
Language	English