Rosslare AC-015 User Manual

AC-015 Page 35 March 2008
Changing the Door Release Time
1) Press the “#” key for 2 seconds
• You will hear a short beep
• The MODE LED will
turn off
• The DOOR LED will
be red
Mode Door
RED
2) Enter the 4-digit
Programming Code for
confirmation. (Default
code is 1234.)
?
?
?
?
• The DOOR LED will
turn green
• The MODE LED will
be off
Mode Door
GREEN
3) Press 6
• The DOOR LED will
remain green
• The MODE LED will
flash green
Mode Door
GREEN GREEN
NOTE: This is a 4-digit code. The first digit signifies
whether the unit is being used for fail secure
(factory default setting) or fail safe operation.
The second digit signifies the length of time in
minutes the tamper alarm will sound. The last 2
digits signify the time the door release will be
activated (from 01 to 99 seconds).
For Fail Secure Operation:
• Enter 0 for the first digit
For Fail Safe Operation:
• Enter 1 for the first digit

Rosslare AC-015 Specifications

General

Brand	Rosslare
Model	AC-015
Category	IP Access Controllers
Language	English