Rosslare AC-C32 - Ac-C32; Figure 6: AC-C32 - Wiring the Lock Strike Relay and REX; Figure 7: AC-C32 - Wiring the BL-D40 External Sounder

38 pages

To Next Page

To Previous Page

Installation

AC-x32 Series Installation and Programming Manual 15

3.2.2 AC-C32

Figure 6: AC-C32 – Wiring the Lock Strike Relay and REX

Figure 7: AC-C32 – Wiring the BL-D40 External Sounder

Main Page

Table of Contents3
Introduction8
Reader/Controller Types8
Equipment8
Additional Equipment9
Technical Specifications10
Installation12
Mounting12
Figure 1: AC-B32 - Mounting Holes and Terminal Blocks12
Figure 2: AC-C32 - Mounting Holes and Terminal Blocks13
Figure 3: AC-D32 - Mounting Holes and Terminal Blocks13
Wiring14
Ac-B3214
Figure 4: AC-B32 - Wiring the Lock Strike Relay and REX14
Figure 5: AC-B32 - Wiring the BL-D40 External Sounder14
Ac-C3215
Figure 6: AC-C32 - Wiring the Lock Strike Relay and REX15
Figure 7: AC-C32 - Wiring the BL-D40 External Sounder15
Ac-D3216
Figure 8: AC-D32 - Wiring the Lock Strike Relay and REX16
Figure 9: AC-D32 - Wiring the BL-D40 External Sounder16
Operation17
User Levels17
Modes of Operation18
Normal Mode18
Bypass Mode18
Secure Mode18
Changing the Modes of Operation19
Changing from Normal to Secure Mode19
Changing from Secure to Normal Mode19
Changing from Normal to Bypass Mode20
Changing from Bypass Mode to Normal Mode20
REX Button20
Case and Back Tampers21
BL-D40 External Sounder21
Programming23
Entering Programming Mode24
Exiting Programming Mode24
Changing Open Code 125
Changing Open Code 225
Changing the Programming Code26
Changing the Normal/Secure Code27
Changing the Normal/Bypass Code and Door Chime Settings27
Setting Fail Safe/Secure Operation, Tamper Siren Time, and Lock Strike Release Time28
Enrolling Primary and Secondary Codes29
Primary Codes29
Secondary Codes30
Enrolling Primary and Secondary Codes30
Enrolling Primary and Secondary Codes Using the Standard Method30
Enrolling Secondary Codes Using the Code Search Method32
Deleting Primary and Secondary Codes33
Deleting Primary and Secondary Codes Using the Standard Method33
Deleting Primary and Secondary Codes Using the Code Search Method34
Return to Factory Default Settings35
Replacing a Lost Programming Code36
Replacing a Lost Normal/Secure Code36
Limited Warranty37

Rosslare AC-C32 - Ac-C32; Figure 6: AC-C32 - Wiring the Lock Strike Relay and REX; Figure 7: AC-C32 - Wiring the BL-D40 External Sounder

Table of Contents

Other manuals for Rosslare AC-C32

Related product manuals