Rosslare AC-C32 - Changing the Modes of Operation; Changing from Normal to Secure Mode; Changing from Secure to Normal Mode

Operation
AC-x32 Series Installation and Programming Manual 19
4.3 Changing the Modes of Operation
4.3.1 Changing from Normal to Secure Mode
The default factory setting for the Normal/Secure Code is 3838.
To change from Normal to Secure mode:
1. Enter the 4-digit Normal/Secure code.
The Mode LED flashes red.
2. Press # to confirm the mode change.
The Mode LED turns red.
4.3.2 Changing from Secure to Normal Mode
The default factory setting for the Normal/Secure Code is 3838.
To change from Secure to Normal mode:
1. Enter the 4-digit Normal/Secure code.
The Mode LED flashes green.
2. Press # to confirm the mode change.
The Mode LED turns green.
Mode
Door
Red
Mode
Door
Red
Mode
Door
Green
Mode
Door
Green