Rosslare AYC-E 5 Series - Page 33

Controller Operation
AYC-Ex5/T65 Series Installation and Programming Manual 33
The left LED flashes green.
2. Press # to confirm the mode change.
The left LED stops flashing.
4.2.4.3 Changing from Normal Mode to Bypass Mode
See Section 4.9.7 to create/modify the Normal/Bypass code.
To change from Normal to Bypass mode:
1. Enter the Normal/Secure code.
The left LED flashes orange.
2. Press # to confirm the mode change.
The left LED stops flashing.
4.2.4.4 Changing from Bypass Mode to Normal Mode
See Section 4.9.7 to create/modify the Normal/Bypass code.
To change from Bypass to Normal mode:
1. Enter the Normal/Secure code.
The left LED flashes green.
2. Press # to confirm the mode change.
The left LED stops flashing.
Green
Green
Green
Orange
Orange
Orange
Green
Green