Rosslare AYC-E 5 Series User Manual

Controller Operation
50 AYC-Ex5/T65 Series Installation and Programming Manual
4.9.12 Enrolling Primary and Secondary Codes
4.9.12.1 Primary Codes
 Primary codes can only be enrolled to an empty user slot,
meaning a slot where there is no existing Primary code.
 Primary codes must be unique, meaning one user’s Primary
code may not be the same as other user’s Primary code.
 Primary codes cannot be the same as any system codes, such
as the Normal/Secure code or Lock Strike code.
 Users who hold a Primary code can gain entry only during
Normal mode.
4.9.12.2 Secondary Codes
 Secondary codes can only be enrolled to a user slot that
already has a Primary code enrolled but has no Secondary
code.
 Secondary codes do not have to be unique, meaning multiple
users can all hold the same Secondary code.
 Secondary codes cannot be the same as any system codes,
such as the Normal/Secure or Lock Strike codes.
 Users who hold Secondary codes can gain entry in any mode of
operation.
4.9.12.3 Enrolling Methods
There are two methods to enroll Primary and Secondary codes:
 Standard Method
The Standard Method is mainly used when the user slot
number for the user you wish to program is known. You can
program both Primary and Secondary codes using the Standard
method (see Section 4.9.12.4).
 Code Search Method
The Code Search Method is mainly used when enrolling a
user’s Secondary code and the User Slot code is unknown.

Rosslare AYC-E 5 Series Specifications

General

Brand	Rosslare
Model	AYC-E 5 Series
Category	Controller
Language	English