Rosslare AYC-F/Gx4 Series User Manual

Controller Functionality
AYC-Fx4 and AYC-Gx4 family manual Page 33
6.9 Programming the AYC-Fx4/AYC-Gx4
Programming the AYC-Fx4/AYC-Gx4 is done solely via the unit's
keypad driven Programming Menu System. To reach the
Programming Menu System the AYC-Fx4/AYC-Gx4 must first be
placed into Programming mode. See Entering Programming
Mode on page 34 for more information.
During the AYC-Fx4/AYC-Gx4 manufacturing process certain
codes and settings are pre-programmed. These settings are the
called the Default Factory Settings.
The table below shows the names of all the AYC-Fx4/AYC-Gx4
Menus. It also shows of all the AYC-Fx4/AYC-Gx4 default factory
codes and settings.
6.9.1. Programming Menu
Menu
No.
Menu Description
Default
4
digit
5
digit
6
digit
4-8
digits
1
Changing Lock Strike Code
2580
25802
258025
25802580
2
Changing Auxiliary Code
0852
08520
085208
08520852
3
Changing Program Code
1234
12341
123412
12341234
4
Changing Normal/Secure Code
3838
38383
383838
38383838
5
Changing Normal/Bypass Code
N/A
6
Changing Door Release Time
0004
Defining auxiliary inputs/outputs
2004
Set Lockout
4000
7
Enrolling PIN Code
8
Deleting PIN Code
9 Code assignment with
strike/auxiliary
0 Return to factory defaults /
Change PIN code Length
You will find a complete description and instructions for each of
the above menu items on the following pages.

Rosslare AYC-F/Gx4 Series Specifications

General

Brand	Rosslare
Model	AYC-F/Gx4 Series
Category	Controller
Language	English