If the assignment code is valid,
the Mode indicator will stop
flashing.
The controller is now waiting for another slot number. Depress the
# key to move to the next slot or enter a new slot number. If you
do not wish to continue, depress the # key twice and the
controller will return to its normal mode.
6.9.17. Relay Code Assignment using Search Method
1) Enter the programming
mode.
2) Depress 9 to enter Menu 9.
• The Mode LED will turn green.
• The Door LED will turn
orange.
3) Enter 000 for user slot access.
• The Door LED will flash
orange.
The controller is now waiting for the primary code of the user.
4) Enter the primary code
belonging to the user.
• The Mode LED will flash
green.
5) Enter the assignment digit for the current user slot:
• 1 will activate the Lock Strike relay only deafult
• 2 will activate the Auxiliary relay only
• 3 will activate the Lock Strike and Auxiliary relays.
If the assignment digit is valid, three beeps will be heard and the
controller will return to its normal mode.
If the assignment digit is invalid, a long beep will sound and the
controller will wait for another assignment digit to be entered.
To Next Page
Loading...
Need help?
General
