Controller Functionality
AYC-Fx4 and AYC-Gx4 family manual Page 27
6. Controller Functionality
The AYC-Fx4/AYC-Gx4 series can function both as a reader and as
a controller. If the unit is connected to Rosslares’ secure
application appurtenance, it functions as a controller indicated
by two beeps immediately after power-on reset.
The lock strike output and Request to Exit input are not located on
the AYC-Fx4/AYC-Gx4 unit, eliminating the possibility of
unauthorized entry to the restricted area.
The following explains how the AYC-Fx4/AYC-Gx4 series functions
as a controller.
6.1 Normal, Secure, and Master Users
The AYC-Fx4/AYC-Gx4 accepts up to 500 users and provides entry
via the use of PIN codes and/or Proximity cards. Each user is
provided with two code memory slots, Memory Slot 1 (Primary
Code) and Memory Slot 2 (Secondary Code).
The pin code length has several options. The pin code length can
be a set number of 4, 5 or 6 digits or it can be a 4-8 digits option.
When choosing the 4-8 digit option, please note that you should
either enter zeros before the code, or press pound at the end (for
example if your code is 12345, enter either 00012345 or 12345#).
Entering a code refers to either PIN or CARD depending on
the model you have.
The way in which the two memory slots are programmed
determines a user’s access level and also determines the way in
which the AYC-Fx4/AYC-Gx4 grants access in its three modes of
operation. There are three user levels:
To Next Page
Loading...
Need help?
General
