3) Construct a code using the following
instructions:
Set the number of wrong code
attempts, which will cause Lockout
between 0 and 9 attempts.
Sets the Duration of the lockout,
between 00 and 99, the value is
multiplied by ten, resulting in 0-990
seconds
6.9.14. Enrolling Primary and Secondary Codes
Primary Codes
• Primary Codes can only be enrolled to an empty User Slot,
i.e. a slot where there is no existing Primary Code.
• Primary Codes must be unique, i.e. one user’s Primary Code
may not be the same as other users Primary Code.
• Primary Codes cannot be the same as any system codes,
such as the Normal / Secure Code or Lock Strike Code.
• Users who hold a Primary Code can gain entry only during
Normal mode.
Secondary Codes
• Secondary Codes can only be enrolled to User Slot that
already has a Primary Code enrolled but no Secondary
Code.
• Secondary Codes do not have to be unique, i.e. multiple
users can all hold the same Secondary Code.
• Secondary Codes cannot be the same as any system
codes, such as the Normal / Secure Code or Lock Strike
Codes.
• Users who hold Secondary Codes can gain entry in any
Mode of Operation.
To Next Page
Loading...
Need help?
General
