Controller Functionality
AYC-Fx4 and AYC-Gx4 family manual Page 47
Enrolling Primary and Secondary Codes
There are two methods to enroll Primary and Secondary codes,
the Standard Method and the Code Search Method.
• The Standard Method is mainly used when the User Slot
number for the user you wish to program is known. You can
program both Primary and Secondary Codes using the
Standard method. (See Enrolling Primary and Secondary
Codes using the Standard Method on page 47.)
• The Code Search Method is mainly used when enrolling a
user’s Secondary Code and the User Slot Code is unknown.
The Code Search method only works if a user’s Primary Code is
already enrolled but the Secondary Code is not. (See Enrolling
Secondary Codes using the Code Search Method on page 48.)
Enrolling Primary and Secondary Codes using the Standard Method
1) Enter the Programming
Mode.
2) Press 7 to enter Menu 7.
• The Door LED will turn
orange
3) Enter the 3-digit User Slot number
between 001and 500 that you wish to
enroll a Primary or Secondary code to. For example, User Slot
003 represents User #3.
• If the selected slot has no Primary Code, the Mode LED will
flash green, indicating
that the controller is ready
to accept a Primary Code.
• If the selected slot already has a Primary Code but no
Secondary Code, the Mode LED will flash red, indicating
that the controller is ready
to accept a Secondary
Code.
To Next Page
Loading...
Need help?
General
