Changing from Secure Mode to Normal Mode
The default factory setting for the Normal / Secure code is 3838.
1) Enter the Normal / Secure
code
• Mode LED will flash green
2) Press the “#” key to confirm
the mode change.
• Mode LED will turn green
Changing from Normal Mode to Bypass Mode
See Changing the Normal / Bypass Code and Door Chime
Settings
on page 37 to create/modify the Normal / Bypass code.
1) Enter the 4 digit Normal /
Bypass code
• Mode LED will flash
Orange
2) Press the “#” key to confirm
the mode change.
• Mode LED will turn orange
Changing from Bypass Mode to Normal Mode
See Changing the Normal / Bypass Code and Door Chime
Settings
on page 37 to create/modify the Normal / Bypass code.
1) Enter the 4 digit Normal /
Bypass code
• Mode LED will flash green
2) Press the “#” key to confirm
the mode change.
• Mode LED will turn green
To Next Page
Loading...
Need help?
General
