3. The lift
7
117592 ● 03/2013
3.5 Permitted weight distribution
Figure 3: Vehicle centre of gravity
The weight distribution on the adapters is
reversible for this post lift: The heavy load can
either be placed on the long or the short arms
P1 (1/3) - P2 (2/3) of the maximum load.
Figure 3: Minimum distance between two
adapters
Not less than 1000 mm
If the distance is less, the load capacity of the lift
will be reduced
The weight distribution must match the
guidelines specified in this chapter. We
therefore recommend distributing the weight
as centrally as possible in relation to the axis
of the posts.
3
4
i
To Next Page
Loading...
