3
CAUTION
Lift to be used
by trained operator
only.
©
?
?
?
SAFETY
INSTRUCTIONS
Proper maintenance
and inspection
is necessary
for safe operation.
c
OWNER/EMPLOYER RESPONSIBILITIES
The Owner/Employer:
• Shall ensure that lift operators are qualified and that they are trained in the safe
use and operation of the lift using the manufacturer’s operating instructions;
ALI/SM01-1, ALI Lifting it Right safety manual; ALI/ST-90 ALI Safety Tips
card; ANSI/ALI ALOIM-2000, American National Standard for Automotive
Lifts-Safety Requirements for Operation, Inspection and Maintenance; ALI/WL
Series, ALI Uniform Warning Label Decals/Placards; and in the case of frame
engaging lifts, ALI/LP-GUIDE, Vehicle Lifting Points/Quick Reference Guide
for Frame Engaging Lifts.
• Shall establish procedures to periodically inspect the lift in accordance with the
lift manufacturer’s instructions or ANSI/ALI ALOIM-2000, American National
Standard for Automotive Lifts-Safety Requirements for Operation, Inspection
and Maintenance; and The Employer Shall ensure that lift inspectors are quali-
fied and that they are adequately trained in the inspection of the lift.
• Shall establish procedures to periodically maintain the lift in accordance with
the lift manufacturer’s instructions or ANSI/ALI ALOIM-2000, American
National Standard for Automotive Lifts-Safety Requirements for Operation,
Inspection and Maintenance; and The Employer Shall ensure that lift mainte-
nance personnel are qualified and that they are adequately trained in the mainte-
nance of the lift.
• Shall maintain the periodic inspection and maintenance records recommended
by the manufacturer or ANSI/ALI ALOIM-2000, American National Standard
for Automotive Lifts-Safety Requirements for Operation, Inspection and Mainte-
nance.
• Shall display the lift manufacturer’s operating instructions; ALI/SM 93-1, ALI
Lifting it Right safety manual; ALI/ST-90 ALI Safety Tips card; ANSI/ALI
ALOIM-2000, American National Standard for Automotive Lifts-Safety Re-
quirements for Operation, Inspection and Maintenance; and in the case of
frame engaging lifts, ALI/LP-GUIDE, Vehicle Lifting Points/Quick Reference
Guide for Frame Engaging Lifts; in a conspicuous location in the lift area
convenient to the operator.
• Shall provide necessary lockout/tagout means for energy sources per ANSI
Z244.1-1982 (R1993), Safety Requirements for the Lockout/Tagout of Energy
Sources, before beginning any lift repairs.
• Shall not modify the lift in any manner without the prior written consent of the
manufacturer.
To Next Page
Loading...
Need help?
General
