Rotax 914 series Service Instruction

d06525.fm
20 December 2017 12-10-00
page 8 of 13
Copyright - BRP-Rotax GmbH & CO KG. All rights reserved.
SI-912 i-001R5 / SI-915 i-001
SI-912-016R10 / SI-914-019R10
SERVICE INSTRUCTION
m
WARNUNG
NOTICE
Regarding the temporary use of “100% pure ethylene glycol”. It should be
only a temporary measure. Using the concentrate over time would cause
the additives to drop out and possibly block cooling system passageways.
If true 100% pure ethylene glycol were used, it would be corrosive as it
would not contain any additives.
m
WARNUNG
NOTICE
The above warnings are taken from the manufacturer’s users manual,
however the original text and description in the users manual is binding
(see: www.evanscoolant.com).

Rotax 914 series Specifications

General

Bore	79.5 mm
Stroke	61 mm
Compression Ratio	9.0:1
Cooling System	Liquid-cooled cylinder heads, air-cooled cylinders
Redline	5800 rpm
Engine Type	4-cylinder, 4-stroke
Fuel Type	Avgas 100LL
Oil System	Dry sump
Fuel System	fuel injection
TBO (Time Between Overhauls)	2000 hours
Displacement	1.211 liters (1211 cc)
Power Output	84.6 kW (115 hp) at 5, 800 rpm