Rotax 915 i A SERIES User Manual

AIRCRAFT ENGINES
ref. no.: OM-915 i A
| part no.: 898851
OPERATORS MANUAL
FOR ROTAX® ENGINE TYPE 915 i A SERIES
picture: ROTAX® 915 iS with options

Rotax 915 i A SERIES Specifications

General

Brand	Rotax
Model	915 i A SERIES
Category	Engine
Language	English

Summary

General Note and Safety Information

Key Safety Information and Precautions

Provides critical safety guidance on intended use, flight operations, potential hazards, and compliance.

Engine Operating Instructions and Media

Operating Limits and Performance Parameters

Details critical engine parameters like speed, altitude, temperature, and pressure that must not be exceeded.

Standard Engine Operation Procedures

Daily and Pre-flight Checks

Outlines essential safety procedures and coolant level checks before each operation.

Engine Start, Warm-up, and Run-up

Provides step-by-step guidance for safely starting, warming up, and performing run-up checks.

Engine Shut-off Procedure

Handling Abnormal Engine Operations

Engine Failures and EMS Indicators

Addresses EMS health status indicators and recommended actions for engine failures in flight.

Engine Start Failures and Operational Limits

Covers issues like insufficient power or fuel supply, and starting at low oil temperatures.

Sprag Clutch Failure and Starter Issues

Exceedance of Operational Limits

Fuel Pressure and Emergency Procedures

Advises on actions for fuel pressure issues and other abnormal conditions requiring precautionary landing.

Engine Performance and Fuel Consumption Data

System Descriptions and Components