Rotax 915 i A SERIES User Manual

2.2) Operating media-Coolant
ATTENTION
Obey the latest edition of Service Instruction SI-915 i-001, for
the selection of the correct coolant.
Conventional
coolant
Conventional coolant mixed with water has the advantage of a
higher specific thermal capacity than water-less coolant.
Application
When correctly applied, there is sufficient protection against va-
por bubble formation, freezing or thickening of the coolant with-
in the operating limits.
Use the coolant specified in the manufacturers documentation.
Mixture
ATTENTION
Obey the operating media manufacturer's instructions!
2.3) Operating media-Fuel
ATTENTION
Obey the latest edition of Service Instruction SI-915 i-001, for
the selection of the correct fuel.
ATTENTION
Use only fuel suitable for the respective climatic zone.
NOTE
Risk of vapour formation if using winter fuel for summer
operation.
Antiknock
properties
Fuels with following specification can be used:
Usage/Description
Anti knock properties
915 iSc/iS
Min. RON 95
NOTE
For fuels according to ASTM D4814 specifications following
AKI (Anti Knock Index) value has to be observed: min. AKI 91.
Page 2-6
December 01 2017
BRP-Rotax Effectivity: 915 i A Series
Edition 0 / Rev. 0

Rotax 915 i A SERIES Specifications

General

Brand	Rotax
Model	915 i A SERIES
Category	Engine
Language	English