Need help?Do you have a question about the Rotax 582 UL DCDI 90 and is the answer not in the manual?
General| Engine Type | 2-cylinder, 2-stroke |
|---|---|
| Bore | 76 mm |
| Stroke | 64 mm |
| Max RPM | 6800 RPM |
| Cooling | Liquid-cooled |
| Lubrication System | Premix or oil injection |
| Recommended RPM | 5500-6500 RPM |
| Displacement | 580.7 cc |
| Carburetion | 2 carburetors |
| Oil Type | 2-stroke oil |
| Gearbox | Optional reduction gearbox |
| Ignition | DCDI (Digital Capacitor Discharge Ignition) |
| Fuel Type | Minimum 90 octane unleaded or leaded |
Explanation of warning, attention, and note symbols used in the manual.
Critical safety warnings regarding engine stoppage, operating conditions, and certification.
Table of maximum installation dimensions (x, y, z axes) for different engine models.
Identification of engine attachment points and requirements for installation.
Guidelines on correct engine installation positions and carburetor orientation.
Recommendations for engine mounting, isolation, damping, and torque.
Instructions for installing the exhaust system, including support and lubrication.
Significance of EGT, measurement recommendations, and maximum limits.
Guidelines for liquid cooling systems, including circuit arrangement and temperature.
Instructions and advice for installing and using the oil injection system.
Wiring diagram for the DCDI ignition system, listing component connections.
Technical specifications and connection diagrams for rectifier-regulators and starter systems.
Technical data and attachment hole specifications for the "B" type gearbox.
Technical data and attachment hole specifications for "C", "CL", "E", and "EL" type gearboxes.
To Next Page
