To Next PageTo Next Page
Need help?Do you have a question about the Rotax 277 and is the answer not in the manual?
General| Cooling System | Air-cooled |
|---|---|
| Carburetor | Bing 54 |
| Compression Ratio | 10.5:1 |
| Type | 2-stroke, single cylinder |
| Bore x Stroke | 72 mm x 66 mm |
| Power Output | 26 hp |
| Fuel System | Carburetor |
| Ignition System | Magneto |
| Lubrication System | Oil injection |
Key safety guidelines for engine operation and maintenance.
Information on fuel contamination, storage, and mixing procedures.
Step-by-step guide for correctly mixing fuel and oil.
Essential pre-operation checks for safe and reliable engine starting.
Step-by-step instructions for starting the engine.
Procedure for initial engine break-in, including RPM and time settings.
Details on the BING carburetor, its adjustments, and filter requirements.
Illustrated breakdown of the BING carburetor components for identification.
Step-by-step guide for setting the engine's ignition timing.
Checklist for essential inspections after the initial engine break-in period.
Engine timing inspection and adjustment intervals for optimal performance.
Requirements for annual engine head nut checks and re-torquing.
Visual check and annual re-torque of engine mount nuts for security.
Frequent inspection of the air filtration system for cleanliness.
Regular check of the fuel filtration system for clean fuel supply.
Procedure for decarbonizing the engine's combustion chamber.
Precautions for protecting the engine during storage periods.
Precautions and troubleshooting for the ignition damping box.
