Rotax 915 i A SERIES - Check of Mechanical;Electronic Components

Mech./electronic
components
Check of mechanical/electronic components.
Step Procedure
1 Turn propeller slowly by hand in direction of engine rota-
tion several times and observe engine for odd noises or
excessive resistance and normal compression.
2 Verify free movement of throttle valve and the complete
range.
3 Inspect for damages, leakage and general condition of
exhaust system and turbocharger.
4 Visual inspection for mechanical and thermal damages
of sensor, actuators and the wiring harness.
5
Visual inspection for mechanical and thermal damages
of pressure control valve, fusebox and ECU.
Page 3-4
December 01 2017
BRP-Rotax Effectivity: 915 i A Series
Edition 0 / Rev. 0