Effectivity: 915 i A Series
Edition 0 / Rev. 0
BRP-Rotax Page 1-7
December 01 2017
1.3) Safety
Although reading such information does not eliminate any haz-
ards, it promotes the understanding and application the infor-
mation will promote correct use of the engine. Always apply
common workshop safety rules.
The information and descriptions of components and systems
contained in this Manual are correct at the time of publication.
BRP-Rotax maintains a policy of continuous improvement of its
products without imposing upon itself any obligation to retrofit
products previously manufactured.
Revisions
BRP-Rotax reserves the right to remove, replace or discontinue
any design, specification, feature or other at any time, and with-
out incurring obligation.
Measurement
Specifications are given in the SI metric system with the imperi-
al and US customary measurement system equivalents in
parenthesis.
Symbols used
This Manual uses the following symbols to emphasize particular
information. This information is important and must be
observed.
m WARNING
Identifies an instruction which, if not followed, may cause seri-
ous injury or even fatal injury.
m CAUTION
Identifies an instruction which, if not followed, may cause mi-
nor or moderate injury.
ATTENTION
Identifies an instruction which, if not followed, may severely
damage the engine or could void any warranty.
NOTE
Indicates supplementary information which may be needed to
fully complete or understand an instruction.
To Next Page
Loading...
