2 x Product description
11
BA ROTEX A1 BO - 10/2007
Mixer circuit (optional)
A mixer circuit can be connected directly to the oil condensing boiler which is controlled through the electronic boiler control.
ROTEX offers the following:
– The ready-to-connect mixer group AMK1 ( 15 60 44), which contains a circulation pump integrated in the heat insulated
housing, a motor mixer and stop valves with temperature displays.
– The mixer circuit contact sensor TMKF ( 15 60 62).
By cascading from the heat circuit expansion modules THETA HEM1 ( 15 60 61), the system can be expanded by up
to 5 mixer circuits and/or storage tank charging circuits. The required temperature sensors need to be ordered separately (mixer
circuit contact sensor TMKF ( 15 60 62), storage tank temperature sensor TSF ( 15 60 63)).
Room controller (optional)
You can connect a separate room temperature controller THETA RFF ( 15 40 70) for each heating circuit to remotely
set operating modes and room temperatures from another room.
You can connect a separate room temperature controller ALPHA RTR-E ( 17 5126) for each heating circuit to remotely
set operating modes and room temperature from another room.
Room station (optional)
All temperature values and operating modes of the control unit THETA 23R (central unit) can be displayed and changed
through the room station THETA RS ( 15 70 18) . Apart from the chimney sweep and manual operation function, all controls
(display, buttons, rotary switch and functions (e.g. timer programmes) are identical to those on the central unit.
The room station THETA RS can be installed in a suitable place in the building and can be used to remotely operate the boiler
control unit.
2.5 Hot water storage tank
There are 5 types of hot water storage tank available for the oil condensing boiler A1 BO. The ROTEX Solaris System for hot
water preparation can also be incorporated.
q
q
a
q
For further information on hot water storage tanks, please consult the documentation for Sanicube INOX,
Sanicube PEX and Solaris.
For further information on incorporating a hydraulic system, please contact your ROTEX dealer.