ROXELL -- 0512
GENERAL INFORMATION
1. OBEY THE LEGAL REGULATIONS AND THE APPLICABLE RULES!
Thisconcerns,amongotherthings,theEuropeandirectivestransposedintonationallegislationand/orthelaws,safetyandacci-
dent prevention regulations that apply in the user’s country.
During assembly, operation and maintenance of the installation the legal regulations concerned and the applicable technical
rules must be obeyed.
2. INTENDED USE
Theinstallationhasbeendesignedsolelyforintensivelivestockuseandhasbeendevelopedaccordingtotheapplicablerulesof
good workmanship. Extra loading of the product is therefore prohibited. Any other use is considered to be improper use. The
manufacturer is not responsible for damage resulting there from. The user bears sole responsibility.
3. NOT-INTENDED USE
All use different than described in point 2” intended use” is at the responsibility of the end user.
4. LIABILITY
Anyclaimunderguaranteeisvoidfordamagethathasresultedfromimproperuseandunauthorisedactionsnotprovidedforin
the instructions for use. ROXELL NV cannot be held responsible for this damage.
Thisdeclarationrelatesexclusivelytothemachineryinthestateinwhichitwasplacedonthemarket,andexcludescomponents
which are added and/or operation s carri ed out subsequently by the final user.
The liability of Roxell ends in case the end user changes or adapts the installation himself.
5. PERSONNEL QUALIFICATIONS
USER:
Theperson who usesaf unctionor operationofa productfortheirwork orwhoworkson theproduct.The usermustbe ableto
read the instructions for useand fullyunderstand them. The user has knowledge of thefunctioning and construction of the in-
stallation.
TECHNICALLY TRAINED PERSON:
Anexpertwhocanassembleandmaintaintheinstallation(mechanically/electrically),andresolvemalfunctions.Onthebasis
of his/her technical training and experience, he/she hassufficient knowledge to be able to assessactivities, recognisepossible
dangers and rectify dangerous situations.
6. INFORMATION ABOUT THE RESIDUAL RISKS -- USED SAFETY SIGNS
There are three levels of danger, which you can recognize from the signal word
* DANGER
* WARNING
* CAUTION
The nature and source of the imminent danger and possible consequences of not obeying warnings is stated here!
DANGER
DANGER indicates a direct imminent dangerthat canresult ina serious orevenfatal acci-
dent if the safety measures are not respected.
WARNING
WARNING indicates a possible imminent danger that can result in a serious accident or
damage to the product if the safety measures are not respected.
CAUTION
CAUTIONindicatespossible,dangeroussituationsthat canresultinminorphysicalinjury
or material damage if the safety measures are not respected.
This symbol refers to supporting information.
To Next Page
Loading...
