RR Mechatronics Starrsed ST - Chip Card Type S; Chip Card Type T; PIN Code; Technical Specifications

Contents
Page 10 Starrsed ST Service manual
Version <Book_version> MRN-<MRN_number>-<language_code>
1.1.5. Chip card type S
Chip cards of type S ("Supervisor card") are used by lab supervisors to grant them access to
important instrument settings. When this type of chip card is inserted in the card reader, a PIN
code must be entered to unlock the protected menus.
1.1.6. Chip card type T
Chip cards of type T ("Technician card") are used by service technicians to install and prepare the
instrument for routine operation and to perform service functions. When this type of chip card is
inserted in the card reader, a PIN code must be entered to unlock the protected menus.
1.1.7. PIN code
The following pin codes are applicable for the following cards
Card type
Credits
password
A 100.000 n.a.
B 500.000 n.a.
C 1.000.000 n.a.
D 5.000.000 n.a.
E 10.000.000 n.a.
Q Owner card n.a.
R Reset card 4711
S Supervisor card 3964
T Technician card 4711
I Installation card 4711
n.a.= not applicable
1.2. Technical specifications
Technical specifications for the <Instrument>:
Instrument model
Model name Catalogue number (REF)
Starrsed ST BANG109000