RS Quba - Page 24

4. Tie one end of the jib halyard onto the loop of rope sewn into the head of the
jib, using a knot-on-knot.
5. Pull the jib up and secure the jib halyard in the cleat on the left-hand side of
the mast, above the gooseneck. Only apply enough halyard tension to prevent
the front of the jib from sagging whilst sailing.
6. Coil up the jib halyard and stow it in the pocket on the tack of the mainsail.
Jib Tack Hook
Tying bar
Tying bar Recess
Jib Head
Jib Halyard
Jib Halyard Cleat