7. Take the jib sheet from the jib pack.
8. Thread one end of the jib sheet through the metal eyelet in the clew of the jib,
and tie a figure-of-eight knot in the end.
9. Take the other end of the jib sheet, lead it through the eyelet on the starboard
side of the boat, and through the jib cleat.
10. Lead the end of the jib sheet across the boat and through the jib cleat and
eyelet on the port side of the boat.
11. Lead the end of the jib sheet through the metal eyelet in the clew of the jib, in
the opposite direction to the original end.
12. Tie a figure-of-eight knot in the end of the jib sheet.
To Next Page
Loading...
