RTI Cool Power CP-16i User Manual

11
It’s Under Control
®
CHAPTER 2 | FEATURES AND DESCRIPTION
CP-16i REAR PANEL COMPONENTS
• Red indicates an overload event with the Power Supply. The LED will
light red if internal temperature sensors on the power supply sense an
abnormally high temperature, or if power supply over-current/over-load/
power-limit circuits are triggered. In either case, the power supply will
limit the amplier output to keep the power supply within safe limits, while
keeping the music playing.
THERMAL LED (Red)
The Thermal Protection LED indicates thermal shutdown of the individual zones
(amplier boards).
• The temperatures of all the output channels are individually monitored,
and if one or more of them reaches the thermal limit (105°C) then the
respective Zones will shut down and go into soft start mode (Channels 1/2
= Zone 1, Channels 3/4 = Zone 2, etc), and the Thermal Protection LED
will be lit.
• The other Zones will continue to be active. When the temperature has
dropped below the thermal threshold, the respective Zone(s) start up again
automatically.

RTI Cool Power CP-16i Specifications

General

Brand	RTI
Model	Cool Power CP-16i
Category	Amplifier
Language	English