Need help?Do you have a question about the RTI AD-4 and is the answer not in the manual?
Key points and warnings related to the AD-4's operation and placement for optimal performance.
Steps for unpacking the AD-4 system and inspecting for any signs of damage.
Overview of the AD-4's front panel controls, indicators, and label holders.
RCA inputs for connecting up to four independent local audio sources.
RJ-45 jacks for connecting RTI Remote Source wall plates for remote sources.
3.5mm mini-jack inputs for IR control of remote audio sources via Cat-5 cable.
3.5mm mono mini-jack input for IR control of the AD-4 unit itself.
Port designated for future use; do not connect.
3.5mm stereo mini-jack for connecting a PDM-1 module to mute audio.
3.5mm mono connection providing a +12VDC output to trigger external equipment.
Port designated for future use; do not connect.
Four sets of removable stereo connectors for speaker outputs to each zone.
DB-9 jack for RS-232 control of the AD-4 from a control system.
Socket for connecting the removable AC power cord and housing the fuse.
Description of the front panel of the RSP-1 Remote Source Plate, including inputs and IR output.
Description of the rear panel of the RSP-1 Remote Source Plate, including mounting holes and RJ-45 connection.
Description of the front panel of the PDM-1 Phone/Doorbell Mute Plate.
Description of the rear panel of the PDM-1 Phone-Doorbell Mute Module, including connectors.
Instructions for placing the AD-4 on a flat surface, ensuring proper ventilation.
Instructions for mounting the AD-4 unit in a component rack using included ears.
Procedure for connecting the AC power cord and turning the AD-4 unit on/off.
Guide to connecting up to four local audio sources using RCA inputs.
Instructions for connecting remote audio sources via RSP-1 and Cat-5 cabling.
Details on wiring Cat-5 cables for audio signals and IR control with Remote Source Plates.
Methods for controlling remote audio sources using IR commands via the AD-4.
Wiring instructions for the mute input using the PDM-1 Phone/Doorbell Mute module.
Guidance on connecting speaker wires to the AD-4's zone outputs using phoenix connectors.
Information on controlling the AD-4 unit using Infrared (IR) signals.
Instructions for controlling the AD-4 unit via RS-232 communication.
List of RS-232 commands, functions, and connection settings for AD-4 control.
How to connect two AD-4 units together to expand to a total of eight output zones.
Methods for controlling multiple AD-4 units independently via RS-232.
Diagram illustrating the typical connections for audio sources, doorbell, and PDM-1.
General product specifications including power supply, mounting, dimensions, weight, and warranty.
Specifications for audio sources, inputs, outputs, control interfaces, and voltage triggers.
Detailed audio performance specifications, including power, distortion, frequency response, and channel separation.
Troubleshooting steps for common problems such as no sound or no zone output.
Contact details for general inquiries, telephone, fax, and email for RTI.
How to contact RTI technical support, including required information for faster assistance.
Guidelines for securely packing and shipping the AD-4 unit for warranty or repair service.
To Next Page
General
