RTI Cool Power CP-16i - CHAPTER 4 | SPECIFICATIONS; GENERAL; AUDIO

Cool Power
®
Audio Amplier
CP-16i
24
CHAPTER 4 | SPECIFICATIONS
GENERAL
AUDIO
Number of channels 16 channels in 8 stereo Zones; each Zone can be
bridged.
Output power • 100W per Ch. in SE, 4Ω (1%THD+N, 20Hz –
20kHz)
• 200W per Ch. in BTL, 8Ω (1%THD+N, 20Hz –
20kHz)
Amplier • Amplier Gain: The audio gain (20Hz to
20kHz) is 25.8dB ±0.5dB.
• Amplier Input: The amplier has a Single
Ended input. Maximum input voltage without
clipping is 1Vrms.
• Amplier Output: The amplier uses a Single
Ended output stage. Thus the power output is
GND referenced.
Maximum output voltage without clipping is 28Vp.
THD + N 1%, 4Ω, SE, f=100Hz, Po=1W
Dynamic range 110dBA SE, 115dBA BTL
Idle noise 50uV, A-weighted, 20Hz-20kHz
Upper bandwidth,
-3 dB
• 100 kHz, 4Ω, SE
• 120 kHz, 8Ω, SE
Frequency response ±0.4 dB, 10Hz- 20kHz, all loads
Input impedance 47K Ω
Output serial
impedance
30m Ω, f≤1kHz
Height 1U, 1.7 inches/44 mm (1 RU)
Width 16.7 inches (424mm) - Fits in a standard 19”
equipment rack
Depth 8.98” (228mm) without connectors and 9.30”
(236.3mm) with connectors
Weight 10.98 lbs (4.1kg)
Warranty Three Years (Parts & Labor)