RTS DBP 4M - Audio | OMNEO CH 2 Levels; Input Gain

DBP Digital Beltpack Menu Structure | en 73
Bosch Security Systems, LLC
Technical Manual
2021-06 | 01 | F.01U.380.825
2. Press the SEL/MENU button.
The field becomes active.
3. Rotate either shaft encoder to adjust the level.
4. Press the SEL/MENU button to confirm the change, or press the CLR/BACK button to
abort changes.
9.11 Audio | OMNEO CH 2 Levels
Use the OMNEO CH 2 Levels menu item to configure OMNEO Aux input and output gain levels
for OMNEO channel 2. OMNEO Aux input and output can be mixed to a headset or to the
intercom.
9.11.1 Input Gain
Use the Input Gain menu item to adjust the level of input audio gain on OMNEO channel 2.
The range for this field is -10 dB to 10 dB
The default is 0 dB.
To adjust input gain, do the following:
1. Navigate to the Input Gain menu item (Audio | OMNEO CH2 Levels | Input Gain).
2. Press the SEL/MENU button.
The field becomes active.
3. Rotate either shaft encoder to adjust the level.
4. Press the SEL/MENU button to confirm the change, or press the CLR/BACK button to
abort changes.