Need help?Do you have a question about the RTS MKP-4 and is the answer not in the manual?
Outlines ownership and reproduction rights for RTS product information.
Instructions for inspecting the container and its contents for damage immediately upon receipt.
RTS products warranted for three years against defects in materials/workmanship.
Provides contact details for support and procedures for returning equipment for repair.
Details the terms, conditions, and restrictions for using the included Telex software.
Outlines the limited warranty and liability limitations for the software.
Describes the MKP-4's rack or desktop use and its suitability for users with up to four locations.
Lists key features like compatibility with ADAM/Zeus, full-function keys, call waiting, 4-wire audio, and versatile mic/speaker options.
Details front panel components: Intercom Keys, Key Indicators, Designation Strip Holder, Call Waiting Display, Copy/Clear/Scroll keys, Headset On/Off, Volume Control, Mic Connector, Headset Connector.
Details back panel components: Universal Power Input, External Speaker Connector, Intercom Frame Connectors, Options DIP Switches.
Provides detailed technical specifications for matrix input/output, audio performance, panel mic, headset, speaker, environmental, power, dimensions, finish, and approvals.
Instructions for inspecting the container and its contents for damage immediately upon receipt.
Details the function of DIP switches 1-5 for call display, flash timeout, TIF-951, mic/speaker selection, and latching.
Explains how to set the Address switch for Zeus, ADAM CS, and ADAM systems to uniquely identify the keypanel's location.
Describes options for mounting the MKP-4 (desktop, console, rack) and mentions required hardware.
Instructions for connecting panel microphones, headsets, and speakers to the MKP-4.
Guides connecting the MKP-4 to the intercom system using 9-pin or RJ12 cables and the Address switch.
Steps to check if the keypanel is working after power-up, including LED flashes and call waiting display.
Explains how to assign intercom keys using ZEUSedit/ADAMedit or directly on the MKP-4, covering talk/listen, momentary/latching, and special functions.
Provides steps to clear previously assigned talk or listen functions from intercom keys.
Mentions that designation strip printing is currently in development.
Explains how to switch between the four available setup pages, each containing different key assignments.
Describes how the Headset button functions based on the DIP switch 4 setting, covering panel mic/speaker vs headset use.
Instructions for adjusting listen volume for speakers or headphones and sidetone level.
Covers momentary vs latching operation and different types of key assignments.
Explains the meaning of different LED indications for talk (green, green flash, red, red flash) and listen (solid green).
Describes how to handle multiple incoming calls using the call waiting window and key.
How to use the MKP-4 to answer calls from a TIF-951 telephone interface, including key assignments and operation.
How to check current key assignments on the MKP-4, useful after changes or for verification.
Instructions to display the intercom port number the keypanel is connected to.
How to adjust the level of one's own voice heard in the headphones when using a headset.
General| Brand | RTS |
|---|---|
| Model | MKP-4 |
| Category | Intercom System |
| Language | English |
To Next Page
