Need help?Do you have a question about the RTS Zeus III and is the answer not in the manual?
Introduces the Zeus III as a next-generation intercom system with enhanced features.
Lists key features such as redundant power, USB port, trunking, and additional audio channels.
Details technical specifications including matrix, audio performance, data ports, and power requirements.
Instructions on accessing and configuring the dip switches on the Zeus III unit.
Reference table for S1 dip switch settings and their functions.
Reference table for S2 dip switch settings and their functions.
Recommends specific cable types and construction for various Zeus III connections.
Step-by-step instructions for powering on the Zeus III unit for the first time.
Outlines the three configuration methods: RS-232, USB, and Ethernet.
Explains connecting the Zeus III to AZedit using Ethernet via network or crossover cable.
Explains how the Zeus III integrates and handles 2-wire and 4-wire party line audio.
Describes adjusting input gain for 2-wire channels on the Zeus III using AZedit.
Introduces the VOX settings window in AZedit for configuring audio threshold levels.
Outlines initial steps for altering IP properties, including disabling connections and navigating control panel.
Introduces the Zeus III as a next-generation intercom system with enhanced features.
Lists key features such as redundant power, USB port, trunking, and additional audio channels.
Details technical specifications including matrix, audio performance, data ports, and power requirements.
Instructions on accessing and configuring the dip switches on the Zeus III unit.
Reference table for S1 dip switch settings and their functions.
Reference table for S2 dip switch settings and their functions.
Recommends specific cable types and construction for various Zeus III connections.
Step-by-step instructions for powering on the Zeus III unit for the first time.
Outlines the three configuration methods: RS-232, USB, and Ethernet.
Explains connecting the Zeus III to AZedit using Ethernet via network or crossover cable.
Explains how the Zeus III integrates and handles 2-wire and 4-wire party line audio.
Describes adjusting input gain for 2-wire channels on the Zeus III using AZedit.
Introduces the VOX settings window in AZedit for configuring audio threshold levels.
Outlines initial steps for altering IP properties, including disabling connections and navigating control panel.
General| Brand | RTS |
|---|---|
| Model | Zeus III |
| Category | Intercom System |
| Language | English |
To Next Page
