ES-2310C User Manual
Publication date: Aug., 2010
Revision A5
111
3-12. Alarm Configuration
Function name:
Events Configuration
Function description:
The Trap Events Configuration function is used to enable the switch to send
out the trap information while pre-defined trap events occurred. The switch
offers 21 different trap events to users for switch management. The trap
information can be sent out in three ways, including email and trap. The
message will be sent while users tick () the trap event individually on the
web page shown as below.
Fig. 3-48
Parameter description:
Trap: Cold Start, Warm Start, Link Down, Link Up, Authentication
Failure, User login, User logout
STP: STP Topology Changed, STP Disabled, STP Enabled
Events Confi
To Next Page
Loading...
Need help?
General
