ES-2310C User Manual
Publication date: Aug., 2010
Revision A5
4
1-2. Checklist
Before you start installing the switch, verify that the package contains the
following:
⎯ ES-2310C 8 Fast Ethernet + 2 Gigabit L2 Managed Switch
⎯ Modules (optional)
⎯ This User's Manual in CD-ROM
⎯ AC Power Cord
⎯ RS-232 Cable
Please notify your sales representative immediately if any of the aforementioned
items is missing or damaged.
1-3. Features
The ES-2310C, a standalone off-the-shelf switch, provides the
comprehensive features listed below for users to perform system network
administration and efficiently and securely serve your network.
•
Hardware
• Supports 8-port 10/100M TP ports with Nway and auto MDIX function
• In ES-2310C, it supports 2 Gigabit dual media ports(TP/SFP) and 2 slots for
removable SFP module supporting 1000M SFP fiber module
• Supports on-line pluggable fiber transceiver modules
• Supports 256KB packet buffer and 128KB control memory
• Supports 8K MAC addresses with automatic learning and aging
• Maximal packet length can be up to 1536 bytes
• Full-duplex flow control (IEEE802.3x) and half-duplex backpressure
• Extensive front-panel diagnostic LEDs; System: Power, CPURUN, 10/100Mbps
TP Port1-8:LINK/ACT/SPD, FDX/COL, 10/100/1000Mbps/Fiber port 9, 10:
LINK/ACT/SPD, FDX/COL
• Management
• Supports concisely the status of port and easily port configuration
• Supports per port traffic monitoring counters
• Supports a snapshot of the system Information when you login
• Supports port mirror function
• Supports the static trunk function
To Next Page
