ES-2310C User Manual
Publication date: Aug., 2010
Revision A5
210
show tos
Syntax:
show tos
Description:
To show IP tos Qos configuration.
Argument:
none
Possible value:
none
Example:
ES-2310C(qos)# show tos
ip tos classification
====================
Global QoS mode: Enable QoS
Disable 802.1p Priority
Enable ip tos classification
Disable ip diffserv classification
Scheduling: weighted round robin method.
weight: wrr 0 = 1; wrr 1 = 2; wrr 2 = 4; wrr 3 = 8.
weighted range: 1~55.
P0~7: Priority 0~7.
Default mode: Queue0: P0,P1; Queue1: P2,P3; Queue2: P4,P5; Queue3:
P6,P7.
P0 P1 P2 P3 P4 P5 P6 P7
---- ---- ---- ---- ---- ---- ---- ----
Queue 0 0 1 1 2 2 3 3
TOS type: Delay Priority
P0 P1 P2 P3 P4 P5 P6 P7
---- ---- ---- ---- ---- ---- ---- ----
Queue 0 0 1 1 2 2 3 3
TOS type: Throughput Priority
P0 P1 P2 P3 P4 P5 P6 P7
---- ---- ---- ---- ---- ---- ---- ----
Queue 0 0 1 1 2 2 3 3
TOS type: Reliability Priority
P0 P1 P2 P3 P4 P5 P6 P7
---- ---- ---- ---- ---- ---- ---- ----
Queue 0 0 1 1 2 2 3 3
TOS type: Monetary Cost Priority
To Next Page
Need help?
General
