Ruby Tech ES-2310C - Page 236

ES-2310C User Manual
Publication date: Aug., 2010
Revision A5
226
set trunk
Syntax:
set trunk <port-range> <method> <group> <active LACP>
Description:
To set up the status of trunk, including the group number and mode of the trunk as
well as LACP mode.
Argument:
<port-range> : syntax 1,5-7, available from 1 to 10
<method>: <static|lacp>
static : adopt the static link aggregation
lacp : adopt the dynamic link aggregation- link aggregation control protocol
<group>: 1-3
<active LACP>: <passive|active>
active : set the LACP to active mode
passive : set the LACP to passive mode
Possible value:
<port-range> : 1 to 10
<method>: static or lacp
<group>: 1-3
<active LACP>: active or passive
Example:
ES-2310C(trunk)# set trunk 2-5 lacp 1 active
show aggtr-view
Syntax:
show aggtr-view
Description:
To display the aggregator list.
Argument:
None.
Possible value:
None.
Example:
ES-2310C(trunk)# show aggtr-view
Aggregator 1) Method: None
Member Ports: 1
Ready Ports:1
Aggregator 2) Method: LACP
Member Ports: 2
Ready Ports:
:
:
: