Copyright © 2017 Ruckus Wireless, Inc. Page 1 of 4
Published April 2017, Part Number 800-71206-001 Rev B
H510 Access Point
Quick Setup Guide
This Quick Setup Guide provides step-by-step instructions on how
to set up your Ruckus Wireless H510 Dual Band 802.11ac
Multimedia Wi-Fi Access Point Wall Switch. After completing the
steps described in this guide, you will be able to access the Wi-Fi
Wall Switch and begin providing wired and wireless network
access to users. The rest of this document refers to the H510
Access Point Wall Switch as the H510.
The H510 has many options:
• It can be mounted on a standard USA- or EU-style single-
gang wall outlet box.
• It can be powered by a customer-supplied IEEE 802.3af- or
802.3at-compliant PoE switch or injector, or can be powered
by an optional customer-ordered DC power adapter.
• It has side cutouts for one or two bypass cables. The
mounting bracket has locating hooks to keep the bypass
cables aligned with the cutouts when attaching the H510 to
the mounting base.
• It can have a low-power (0.5W or less) customer-supplied
USB device plugged in. The USB device is very difficult to
remove after the H510 is attached to the mounting base.
ABOUT PERIPHERAL DEVICES
The H510 can supply power to USB devices and PoE-powered
devices, and the power supplied depends on the PoE power
supplied to the H510.
• The USB port is intended for low-power devices such as BLE
(Bluetooth low energy) beacons. The maximum power that the
USB port can supply is 0.5W.
•The LAN1+PoE port is intended for PoE-powered peripheral
devices such as IP telephones.
THIS GUIDE IN OTHER LANGUAGES
• 请从以下网站获得该指南的简体中文版
https://support.ruckuswireless.com
• Vous trouverez la version française de ce guide à l'adresse
suivante https://support.ruckuswireless.com
• こ の ガ イ ド の ⽇本語版は https://support.ruckuswireless.com
でご覧く ださい
• 이 가이드의 한국어 버전은 웹 사이트
(https://support.ruckuswireless.com
) 에서 확인하시기 바랍니
다
• Veja a versão em português (Brasil) deste guia em
https://support.ruckuswireless.com
• Puede ver la versión en español (América Latina) de esta guía
en https://support.ruckuswireless.com
BEFORE YOU BEGIN
Before deploying Ruckus Wireless products, please check for the
latest software and the release documentation.
• User Guides and Release Notes are available at
http://support.ruckuswireless.com/documents
• Software Upgrades are available at
http://support.ruckuswireless.com/software
• Open Source information is available at
http://opensource.ruckuswireless.com
• Software License and Limited Warranty are available at
http://support.ruckuswireless.com/warranty
PACKAGE CONTENTS
• H510 Access Point Wall Switch
• Mounting bracket
• Two 6mm M3x0.5 thread Torx flat head machine screws
• Two 1” 6-32 thread Phillips pan head machine screws
• Product warranty statement
• Regulatory flyer
• Declaration of Conformity, if required
•This Quick Setup Guide
Note: The H510 requires Ruckus Wireless base image 104.0
firmware or later. Managed H510 deployments require
SmartZone 3.4 or later, or ZoneDirector 9.13.1 or later.
H510 Power Options and Available Power Out for PoE Out
and USB
H510 Power Source Power Available for PoE Out
and USB
802.3af PoE 5W total
802.3at PoE 12.95W PoE Out (802.3af
Class 3) and
0.5W USB
DC power adapter (sold
separately)
12.95W PoE Out (802.3af
Class 3) and
0.5W USB
To Next Page
Need help?
General
