Ruhle MPR 150 - Installation Instructions; Machine Transport and Setup

Tumbler MPR 150 / 220
7
Claims of any type because of damages due to non-in-
tended use are ruled out!
Misuse:
• Any use other than the one listed above is strictly prohibited
and is considered misuse!
• Operating the machine in explosion hazard areas is prohib-
ited!
• Handling / processing products and materials not belonging
to food products is prohibited!
• Connecting several tablet PCs with a machine is prohibited!
2 Installation instructions
Installation and commissioning of the machine may only be carried
out in the presence of a Rühle service technician or by persons au-
thorised by Rühle.
Rühle GmbH Lebensmitteltechnik shall not be liable for any damage
resulting from non-compliance with these operating instructions.
2.1 Machine transport and setup
Please refer to the short instructions supplied with the machine re-
garding transport and setup of the Tumbler.
The machine and machine parts must be transported by 2
persons (1x operator of floor conveyor / 1x transport su-
pervision).
The power supply line must not be damaged by driving
over or pinching it!
The machine must be decommissioned until a damaged
power supply line has been repaired!
Make sure the machine is stable!