Hardware Installation and Reference Guide Product Overview
19
LED
System is not powered on.
System is being initialized. Continuous blinking
indicates a fault.
System is operating normally.
The temperature at the air intake and exhaust vents
exceeds the threshold.
1. The temperature at the air intake and exhaust vents
well exceeds the threshold.
2. The system is not functioning properly.
No link is detected for this port.
The port has made a successful 1000 Mbps link.
The port is sending and receiving traffic at 1000 Mbps.
The port has made a successful 10/100 Mbps link.
The port is sending and receiving traffic at 10/100
Mbps.
No link is detected for this port.
The port has made a successful 1/10 Gbps link.
The port is sending and receiving traffic at 1/10 Gbps.
No link is detected for this port.
The port has made a successful 1000 Mbps link.
The port is sending and receiving traffic at 1000 Mbps.
10/100/1000Base-T Ethernet
Port LED
No link is detected for this port.
The port has made a successful 10/100/1000 Mbps
link.
The port is sending and receiving traffic at
10/100/1000 Mbps.