Web-based Configuration Guide Wi-Fi Network Settings
3. Optimizing the Transmit Power
Choose Wireless > WDS > Channel & Transmit Power > Transmit Power.
Greater transmit power indicates larger coverage and brings stronger interference to surrounding wireless
devices. The default value is Auto, indicating automatic adjustment of the transmit power. In a scenario in which
wireless devices are installed densely, a lower power is recommended. Low, Medium, and High indicate 50%,
75%, and 100% power, respectively.
4. Configuring the Distance
Choose Wireless > WDS > Channel & Transmit Power > Distance.
It is recommended that the configured distance between the NVR and camera be greater than their actual
distance. If the configured distance is much smaller than the actual distance, the wireless performance will
deteriorate, and WDS connection may fail.
To Next Page
Loading...
Need help?
General
