Hardware Installation and Reference Guide 1 Installing the Device
10
3 Installing the Device
Caution
● Before installing the device, make sure you have carefully read the requirements described in Chapter 2.
3.1 Installation Procedure
3.2 Preparing
Carefully plan and arrange the installation location, networking mode, power supply, and cabling before
installation. Confirm the following requirements before installation: The installation position provides sufficient
space for heat dissipation.
⚫ The installation position meets the temperature and humidity requirements of the device.
⚫ The power supply and required current are available in the installation position.
⚫ The selected power supply modules meet the system power requirement.
⚫ The network cables have been deployed in the installation position.
⚫ The installation site meets all described requirements.
⚫ The device meets the customers’ requirements.
3.3 Precautions
It is recommended to mount the device on a pole with a diameter ranging from 35 mm to 89 mm.
To Next Page
Loading...
