Hardware Installation Guide and Reference Verifying Operating Status
14
4 Verifying Operating Status
4.1 Setting up Configuration Environment
Power on the device via 12 VDC or 24 V/0.6 A non-standard PoE power supply. Make sure all power cables are
properly connected and meet the safety requirement.
4.2 Checking Environment before/after Power-on
1. Before power-on, check the following items:
⚫ Verify that the power supply is properly connected.
⚫ Verify that the input voltage matches the specification.
2. After power-on, check the following item (Recommended):
⚫ Check the indicator status.
To Next Page
Loading...
Need help?
General
