Ruijie Reyee RG-NBS3200 Series - Page 13

Ruijie RG-NBS3200 Series Switches Hardware Installation and Reference Guide Product Overview
12
Dimensions
(W x D x H)
440 mm x 357.6 mm x 43.6 mm (with front panel)
Weight
4.75 kg
Device operation in a residential environment may cause radio interference.
The device is not suitable for use in locations where children are likely to be present.
Product Appearance
On the front panel, the RG-NBS3200-24GT4XS-P Ethernet switch provides 24 10/100/1000Base-T Ethernet ports and
4 SFP+ ports. On the back panel, it provides an AC power port.
Figure 1-9 Appearance of the RG-NBS3200-24GT4XS-P
Front Panel
Figure 1-10 Front Panel of the RG-NBS3200-24GT4XS-P
5
Note:
1. Reset button
2. System status LED
3. 10/100/1000 Base-T Ethernet port
4. 10GE SFP+ port
5. Nameplate on the bottom of the device
The switch restarts after the reset button is pressed for less than 2 seconds.
The switch restores the default factory settings after the reset button is pressed for more than 5 seconds (until the
status LED blinks).