Ruijie RG-S5000-24GT4MS-E - Page 11

Hardware Installation and Reference Guide Product Overview
8
LED
Panel Identification
Status
Description
System status
LED
Status
Blinking
green
The system is being initialized.
Solid green
The system is operating normally.
Solid yellow
A system over-temperature alarm is
generated.
Solid red
1. The temperature severely exceeds the
threshold, and the system will be rest and
restart.
2. A system failure occurs.
10/100/1000 Mbps
copper port status
LED
1-48
Off
No link is detected for this port.
Solid green
The port has a 10/100/1000 Mbps link up.
Blinking
The port is receiving or transmitting data.
SFP port status
LED
49F-52F
Off
No link is detected for this port.
Solid green
The port has a link up.
Blinking
The port is receiving or transmitting data.
Solid yellow
The optical attenuation value exceeds the
value specified in the communication
quality requirements.
Solid red
The optical module is in position, but the
optical module fails or an optical link failure
occurs.
1.3 RG-S5000-10GT2MS-E
Technical Specifications
Model
RG-S5000-10GT2MS-E
CPU
Built-in CPU, single-core processor, with the clock speed of 1.2 GHz
BOOT ROM
N/A
Flash Memory
64 MB
SDRAM
DDR4 512 MB
Supported Modules
See Appendix B
The module types may be updated without prior notification. Please contact
Ruijie Networks for details.
SFP Port
2500Base-X Capable
1000Base-X Capable
100Base-FX Capable
Power Supply
AC input:
Rated voltage range: 100 V AC to 240 V AC
Maximum voltage range: 90 V AC to 264 V AC
Frequency: 50 Hz/60 Hz
Rated current: 0.6 A