Ruijie RG-S5000-24GT4MS-E - Power Supply; Heat Dissipation

Hardware Installation and Reference Guide Product Overview
4
Power Supply
The RG-S5000-24GT4MS-E switch adopts an AC power supply.
 AC input:
Rated voltage range: 100 V AC to 240 V AC; 50 Hz/60 Hz
Maximum voltage range: 90 V AC to 264 V AC; 47 Hz to 63 Hz
Frequency: 50 Hz/60 Hz
Rated current: 0.6 A
Power cord requirements: 10 A power cord
Heat Dissipation
The RG-S5000-24GT4MS-E switch adopts natural heat dissipation without fans. To ensure proper heat dissipation,
maintain a minimum clearance of 10 cm (3.94 in.) on both sides and around the back panel of the chassis for air
circulation. Besides, dust the device every three months to avoid blocking the ventilation openings on the housing.
Figure 1-4 Airflow Direction of RG-S5000-24GT4MS-E Switch
The switch should be installed at least 1 U (44.45 mm/1.75 in.) away from the neighbor device for normal heat
dissipation.
LED
LED
Panel Identification
Status
Description
System status
LED
Status
Blinking
green
The system is being initialized.
Solid green
The system is operating normally.
Solid yellow
A system over-temperature alarm occurs.
Solid red
1. The temperature severely exceeds the
threshold, and the system will be reset and
restart.
2. A system failure occurs.
10/100/1000 Mbps
1-24
Off
No link is detected for this port.