Hardware Installation and Reference Guide Installing the Switch
32
3.7 Checking after Installation
Before checking the installation, turn off the power supply to avoid any personal injury or damage to the components
due to connection errors.
Verify that the ground cable is connected.
Verify that the cables and power input cables are correctly connected.
Verify that the 100 m (328.08 ft.) Ethernet cable is routed indoors. If it is routed outdoors, verify that the AC lightning
resistance socket and network interface lightning protector are connected.
Verify that there is a minimum clearance of 10 cm (3.94 in.) around the device.
To Next Page
Loading...
